• 股票简称: 安泰科技
  • 股票代码: 000969
纳米晶共模电感铁芯 Common Mode Choke Cores Made of Antainano® Nanocrystalline Ribbon

高饱和磁感应强度-有效缩小共模电感体积 High saturate induction—reduce volume of CMC,优良的阻抗-频率特性 Excellent impedance frequency characteristic

型号:CCXXX制造商:安泰科技股份有限公司 Advanced Technology & Materials Co., Ltd.
联系人:孙经理 Mr. Sun 原产地:北京市海淀区 Haidian,Beijing China




AT&M will select ribbon with suitable composition and level to wind cores based the performance requirements from customers. Then cores will be annealed in magnetic field to meet customers’ requirements. Finally cores will be packaged according to customer’s requirements.



High saturate induction—reduce volume of CMC


Excellent impedance frequency characteristic  


Outstanding ability to resist unbalanced current  


Excellent thermal stability 



Nanocrystalline alloy has higher Curie temperature compared with ferrite and can stably work even at 180℃; It has higher permeability and saturated inductance. The weight and volume of the nanocrystalline cores are reduced. Usually, the power loss of copper windings is only 50 - 70% of ferrite. Nanocrystalline cores are widely applied to variable frequency drive, EV controller , air-conditioner, LCD TV, induction cooker and other consumer electronics as well as EMC solution of industrial power supply such as welding machines.


2.变频空调(Variable frequency air conditioner)

河南快3走势图3.电磁炉(Induction Cooker )

4.逆变焊机 (Inverter welding machine)



 五、纳米晶与铁氧体铁芯性能对比(Magnetic Performance Comparison Between Nanocrystalline and Ferrite Cores):

基本性能对比 (Basic performance comparison)


六、应用原理及实例介绍( Principle and practical application):

1.变频传动变频器(Variable-frequency Drive Device )


Frequency converter is electricity control equipment which uses variable and micro electronics technologies to control an AC motor through changing frequency of power supply for the motor。 It is composed of rectifier (AC-DC), filters, inverters (DC-AC), brake unit, drive unit, test unit, micro-processing unit, etc。 It adjusts the output voltage and frequency by switching internal IGBT and provides required power supply voltage for energy conservation and speed control。 It is widely applied as the industrial automation improves continuously。 Low-frequency common mode choke cores are used for low voltage inverter(≤1000V) and effectively suppress the interferences。 


2.光伏发电逆变器( PV Inverter)


河南快3走势图AT&M CMC Cores are applied to 500KW & 1MW centralized PV inverters. High-permeability CMC Cores are applied to EMC filters near to AC output of high-power PV inverters. The better EMI suppression effect can be reached by less quantity of CMC cores due to high induction performance. Low- permeability CMC cores are applied to EMC filters near to DC output of high-power PV inverters. Low-permeability CMC cores have excellent inductance performance depend on frequency and effective anti-DC bias performance to avoid the damage from saturated inductance.


3.风力发电变流器(Wind Power Converter )


AT&M CMC Cores are applied to direct-drive and double-fed converters covering 1MW、1。5MW、2MW、3MW, etc。 The choke design of stacking several nanocrystalline cores are effective solution for big bear current problems。 Meanwhile it is also effective EMI solution caused by big current interfere (dozens to more than 100 A) for wind energy, variable-speed drive and other application。 All those problems usually are reflected in high-frequency peak current and easily solved by AT&M stacking CMC cores design。 The stacking ways are depend on saturated current and induction。 Customer can select one core or stacked cores(up to 7 cores)。




Nanocrystalline common mode is more and more applied to on-board charger of the battery electric vehicle and Hybrid Electric Vehicle. Even under temperature as high as 180℃ , Nanocrystalline cores can work safely over long term; restricted by the temperature limit of around 100℃, ferrite cores can’t meet the requirement.


5.气体绝缘开关设备(Gas insulated switchgears)

气体绝缘开关设备(GIS)是非常可靠的电力传输网络的组件。在过去的几年,系统电压达到1。2千伏。GIS的切换操作可能导致危险的瞬态电压(VFTO)。在内部导体上同心的安装纳米晶铁芯作为单匝的电抗器,可以有效地抑制这些破坏性的高频(~15 MHz)电压。其他的铁芯材料如铁氧体不能解决这个问题。

GIS is reliable equipment for power transmission. The system voltage has been up to 1.2KV during past years. The switch operation of GIS may lead to danger VFTO. The reactors with nanocrystalline cores can prevent the damage from high frequency voltage (~15 MHz). Other materials cannot solve this problem such as ferrite.


6.高能粒子加速器(High energy particle accelerator)


Due to the high saturation flux density of at least 1,2Tesla suitable nanocrystalline cores are the preferred solution for the tuning elements in synchrotron cavities。 Related applications like particle beam de-bunchers or bunch compressors are often very much limited in space。 By the use of nanocrystalline cores, the required length compared to Ferrite cores can be reduced by typically 50% - but with the disadvantage of significantly higher power consumption during operation。 But due to their low impedance, the nanocrystalline cores also avoid unfavorable interactions with the ion beam and thus, they are used in several particle beam accelerator installations worldwide。


 一、尺寸图示(Size Chart)




二、产品选型表(Product selection table):



  • 河南快3走势 河南快3 山西快乐十分 河南快3 四川快乐12走势图 四川快乐12开奖结果 广东快乐十分走势图 陕西快乐十分开奖结果 河南快3 陕西快乐十分